当前位置: 首页 » 技术文档 » 螺旋输送机Auger flighting

技术文档

螺旋输送机Auger flighting

发布时间:2014-02-04

螺旋输送机Auger flighting

LS型螺旋输送机按照JB/T 7679-95《螺旋输送机》标准设计制造,是GX螺旋输送机的换代产品。螺旋输送机俗称绞龙,是矿产、饲料、粮油、建筑业中用途较广的一种输送设备,由钢材做成的,用于输送温度较高的粉末或者固体颗粒等化工、建材用产品。

LS type screw conveyor in accordance with JB/T 7679-95 "screw conveyor" standard design and manufacturing, is a product of GX screw conveyor. Commonly known as auger screw conveyor, a conveying equipment widely used in mineral, feed, grain and oil, in the construction industry, a steel made products, used for conveying high temperature powder or solid particles such as chemical, building materials.

(1)垂直螺旋输送机

(1) the vertical screw conveyor

垂直螺旋输送机的螺旋体的转速比普通螺旋输送机的要高,加入的物料在离心力的作用下,与机壳间产生了摩擦力,该摩擦力阻止物料随螺旋叶片一起旋转并克服了物料下降的重力,从而实现了物料的垂直输送。该机输送量小,输送高度小,转速较高,能耗大。特别适宜输送流动性好的粉粒状物料,主要用于提升物料,提升高度一般不大于8米。

Spiral vertical screw conveyor speed than the ordinary screw conveyor to be high, the material under the centrifugal force, the friction force and the friction force between casing, prevent the material with helical blades rotate together and overcome the downward gravity of material, so as to realize the vertical transport of materials. The small amount of conveyor, conveyor height is small, high speed, high energy consumption. Especially suitable for conveying powder material of good, mainly for the material lifting, lifting height is generally not more than 8 meters.

(2)水平螺旋输送机

(2) horizontal screw conveyor

当物料加入固定的机槽内时,由于物料的重力及其与机槽间的摩擦力作用,堆积在机槽下部的物料不随螺旋体旋转,而只在旋转的螺旋叶片推动下向前移动,如同不旋转的螺母沿着转动的螺杆作平移运动一样,达到输送物料的目的。适用于水平或微倾斜(20º以下)连续均匀输送松散物料,工作环境温度为-20—+40℃,输送物料温度为-20—+80℃。其转速相对于垂直输送机要低,主要用于水平或小倾角输送物料,输送距离一般不大于70米。

When the material adding machine groove is fixed in the friction material, gravity and machine between the slot machine, stacked in the groove at the lower part of the material does not vary with the rotating, but only in the rotating spiral blade push forward, like a nut does not rotate along the rotating screw for translational motion, and achieve the delivery material purpose. Suitable for horizontal or slightly inclined (20º the following) uniform continuous conveying bulk material, the working environment temperature of -20 - +40 ℃, conveying material temperature of -20 - +80 ℃. Its speed relative to the lower vertical conveyor, is mainly used for standard or small inclination conveying, the conveying distance generally not more than 70 meters.